=====Entering General Journal Entries=====
{{entry>0;Journal Entries;-}}
General Journal entries are transactions that directly debit and credit the general ledger, using only G/L numbers. They do not use a bank code, account code, or invoice. They are frequently used for corrections to profit and loss (P&L) calculations that need to be booked to an inventory adjustment account.

CATS uses double-entry bookkeeping. This means that all entries, including invoices, have a debit to one G/L number and a credit to another G/L number. You will need to ensure that the lance of all general journal entries works out to $0.00.

====Quick Guide Steps====
1. From the main (**File**) menu, select **Accounting > Data Entry > General Jr.**\\ 
2. Select **Add** from the pending general journal entries scan menu.\\ 
3. Choose the Scan Method, where you can add multiple line items at once, or see below for a description of the G/L number method.\\ 
4. Fill in each line entry, G/L number then amount, until the items balance and the Proof Amount is 0.00. CATS will show you a running tally in the upper right corner whenever you click on a line.\\ 
5. When you have finished with this transaction, pick **Continue** from the scan menu to add this item.\\ 
6. You will return to the pending general journal transactions scan, where you can view and change or post pending items.\\
7. Once done with entry, pick **Print > One Transaction** (or **Select Range** to print more than one entry).\\ 
8. From the pending transactions scan, pick **Post > One Transaction.** Select **Yes** to confirm.\\

====Adding A New Journal Entry====
To add a new entry, pick **Accounting > Data Entry > General Jr** from the main menu. 
[{{:cats:procedures:accounting:transactions:accountingdataentrymenu.png|Select General Jr to review or add general journal entries.}}]

Select **Add** from the pending general journal entries scan menu.
[{{:cats:procedures:accounting:transactions:transactions_genjouraddfromscan.png|Choose Add to create a new general journal entry.}}] 

Next, select a method of entry - the Scan Method, where you can add multiple line items at once, or the G/L number method. Fill in the date, currency and currency rate (if applicable), and an optional note, then click the **Apply** button to proceed.
[{{:cats:procedures:accounting:transactions:transactions_genjour_addnewscreen.png|Select an entry method and enter the date, currency and rate, and note.}}]

====Scan Method====
The scan method uses a list of G/L numbers and accounts. Fill in each line entry, G/L number then amount, until the items balance and the Proof Amount is 0.00.
[{{:cats:procedures:accounting:transactions:transactions_genjour_scanaddentrymethod.png|Input G/L number then amount for each line item.}}]

If you do not know the G/L number you want, you can call up the G/L number chooser by entering any incorrect number and using the [Tab] key to leave the field. Pick the number from the scan and click the **Continue** button to use that account number.
[{{:cats:procedures:accounting:transactions:disbursements_selectglnofromlist.png|If you enter an incorrect G/L number, you can pick one from the G/L chooser.}}]

CATS will show you a running tally in the upper right corner whenever you click on a line.
[{{:cats:procedures:accounting:transactions:transactions_genjour_runningtally.png|CATS will show you a running tally.}}]

When you have finished with this transaction, pick **Continue** from the scan menu to add this item. 
[{{:cats:procedures:accounting:transactions:transactions_genjour_continuefromscan.png|Choose [Continue to finish adding this item.}}]

You will return to the pending general journal transactions scan, where you can view and change or post pending items. 
[{{:cats:procedures:accounting:transactions:transactions_genjour_pendingtransaction.png|View pending general journal transactions in the scan.}}]

====G/L# Method====
The G/L method requires you to enter each number and amount manually. Choose **G/L Method** from the drop-down box when adding an entry and click the **Apply** button.
[{{:cats:procedures:accounting:transactions:transactions_genjour_glmethod.png|}}]

Next, enter a G/L number in the box provided, then pick **Apply**. As always, if you enter a nonexistent number the G/L number chooser will pop up and you can select a number. 
[{{:cats:procedures:accounting:transactions:transactions_genjour_enterglno.png|Enter a G/L number and pick Apply.}}] 

You will be prompted to enter an Amount and an optional Note. Select **Apply** to add this portion of the entry.
[{{:cats:procedures:accounting:transactions:transactions_genjour_enteramount.png|Input an amount to apply to this G/L number.}}]

A tally will be shown on screen for this general journal entry. Continue adding items until you have finished and the entry is balanced. 
[{{:cats:procedures:accounting:transactions:transactions_genjour_balancedentry.png|The current tally will be shown on screen.}}]

To complete the entry, select **Cancel** when prompted to add another item to the entry to return to the pending transactions scan.
[{{:cats:procedures:accounting:transactions:transactions_genjour_canceltoreturn.png|Pick Cancel to finish with this entry and return to the pending items.}}]

Below is an example of a pending general journal entry. Note the multiple G/L numbers used to balance the entry.
Use the Print and Post procedures to review and post this entry to the general ledger.

====Printing and Posting General Journal Entries====
Before you can post your entries, you must print and review them in some way. This process works the same as for other transactions.

===Posting General journal Entries===
From the pending scan, pick **Print > One Transaction** (or **Select Range** to print more than one entry).
[{{:cats:procedures:accounting:transactions:receipts_printmenu.png| Pick Print One Transaction to print a single entry.}}]

You may be asked to confirm printing this transaction. Select **Yes** to proceed.
[{{:cats:procedures:accounting:transactions:transactions_confirmprintingyes.png|Click Yes to proceed with printing the transaction.}}]

Select the output type to continue. 
[{{:cats:procedures:printmenu_html_openinbrowser.png|Print Output Options}}]

Here is a general journal entry printed to **HTML > Open in Browser**. You can review the changes that will occur to each G/L account in the summary area on the bottom of the printout.
[{{:cats:procedures:accounting:transactions:transactions_genjour_printed.png|A general journal entry to the browser.}}]

To print only general journal entries you have entered, select **All by XX** (your user name). <note>The supervisor user ID can view and print transactions by all users.</note>

If you choose **Select**, CATS will ask you to specify which transactions to print by picking the transactions from a chooser. You only need to select one record for each transaction, and CATS will print the entire record. When you have chosen the records, click the **Continue** button.
[{{:cats:procedures:accounting:transactions:transactions_genjourpickfromlist.png|Select which transactions to print, then pick Continue.}}]

===Posting General Journal Entries to the General Ledger===
General journal entries that have been previously printed and are in balance can be posted to the general ledger. This function works much the same as the printing feature described above.

From the pending transactions scan, pick **Post > One Transaction** (or any of the options available to you).
[{{:cats:procedures:accounting:transactions:transactions_postingmenu.png|Select a choice to post pending entries.}}]

You will be asked to confirm posting this general journal entry. Select **Yes** to proceed or **No** to cancel. The number shown is the internal record number for this entry. This number is shown in the scan to allow you to identify that entry.
[{{:cats:procedures:accounting:transactions:transactions_confirmpostingyes.png|Select Yes to post this range of general journal entries.}}]

To post only your general journal entries, select **All by XX** (your user id). 
<note tip>The Supervisor user ID can post disbursements by all users.</note>

If you choose **Select**, you will be asked to choose from a list of general journal entries. You only need to select one line for each entry, and CATS will post the entire record. Pick **Continue** to proceed with posting these entries. 
[{{:cats:procedures:accounting:transactions:transactions_genjourpickfromlist.png|Choose a line item for each transaction, then pick Continue to post.}}]

You will see the confirmation dialogue shown earlier; choose **Yes** to continue with posting.
[{{:cats:procedures:accounting:transactions:transactions_confirmpostingyes.png|Select Yes to post this transaction.}}]

After posting, the pending general journal entries scan will no longer show the transaction you posted. Select **Ledger Scan** from the toolbar menu to view the transaction you just posted.
[{{:cats:procedures:accounting:transactions:transactions_ledgerscanselect.png|Select Ledger Scan from the menu to view the transactions you just posted.}}]

Review the entry, then select **Exit** to return to the pending general journal entries scan.
[{{:cats:procedures:accounting:transactions:ledgerscan_exitfrommenu.png|Select Exit to return to the pending transactions scan.}}]

For more information on transactions, please see the index.

{{tag>"general journal entries" "add general journal entries" "print general journal entries" "post general journal entries" "general journal entries" "gl entries" "direct gl entries"}}